Mastic is a putty used as a glue for tile and other floor and wall coverings. It is watertight and creates a seal, therefore it’s often the correct selection for ducts, kitchens and baths. There are occasions that mastic will ooze out or drop on a tile since you are doing a job. Although it’s ideal to remove the adhesive before it dries — an effortless process with a moist cloth — mastic can be eliminated once it dries without damaging the tile.

Clean any loose residue. Use the whisk broom or little vacuum to remove any loose pieces of adhesive, dust or grout.

Soak clean, absorbent rags in warm water. Use water as hot as you can stand to acquire the rags sopping wet. Place moist loaf on dried glue. Let the wet rags to stay on the dried mastic for up to an hour.

Gently scrape on the mastic off of the tile. It should come up from the tile using a small work. Scrub the mastic in warm water and try scraping once again if needed.

Remove the thin layer of adhesive residue left on the tile by soaking for 10 minutes using citrus cleaner. Wipe with a damp rag after soaking. Citrus cleaner can remove residue faster and save some elbow grease, but warm water is frequently effective. To use warm water, then wipe repeatedly with a wet, warm rag. Use a gentle, nonabrasive scrubber for stubborn residue. For larger regions consider having a buffing attachment on a powered oscillating tool.

Buff the tile using a clean soft rag following eliminating residue. Little, firm strokes will lead to a clean glow on most tile.

See related