Wooden kitchen work-tops are most frequently seen as a the conventional butcher block configuration. This kind of best is tough, can withstand exposure to water or the and pounding over several years of knives and resources. Wooden tops are thick and large. Screws match at the the very top of the cupboard body and typically attach them. In the event that you’re have space to get a wood work-top and updating your house, it’s going to add character and value to your own kitchen.

Remove any current area in the location in your base cabinet and the drawers. Strike the lip in entrance to loosen the counter-top, utilizing a hammer. Insert the suggestion of a crow bar below the lip, as it starts to raise and carry on prying.

Pull up hard-on the countertop until it lifts over the cabinet. Reach to the cabinet together with the crow bar and insert the suggestion supporting the rear of the counter-top. Pry up the back of the counter-top. Lifting and prying before the counter-top lifts free of the cabinet body. Remove any nails that are residual in the frame with pliers.

Insert a 3/16-inch drill bit right into a cordless drill. Place the tip of the drill at the edge of the cabinet body. Tilt the drill at a 30-degree angle and drill so that the leading edge is entered by the drill and emerges out the aspect of the body, 1 inch down in the top. This can be called “toenailing.” Toe-nail screw-holes on the very top of the body in back and front and across all jambs. Space the screw-holes 6- inches.

Drill straight through any flat rails or stretchers, items or corner blocks of framework where there’s enough room.

Place the wood work-top in addition to the cabinet body. Center it in the event the cupboard is connected to the wall and drive it tightly from the wall. Reach to the cupboard and location 13/4inch screws into every one of the screw-holes.

Drive all the screws to the wood leading, utilizing a screw gun.

See related