A board is basically a flat plank that’s between 6″ and 2″ broad, but this may change for specific kinds of uses. A brick carton is a kind of house which is made mainly of brick. Frieze planks are put on brick box properties close to the very best, where they protect the opening between the brick as well as the soffit or the opening between the wall as well as the soffit. In many instances one solid plank can be used with this goal, but one can be constructed to your precise specification, should you not have the perfect size width plank.

Cut planks to the size you have on a tablesaw. Although you want a 6-inch-broad frieze board, but just have two 4 inch-wide planks, cut an inch off the side of every plank. Make use of a blade when cutting with all the grain for the cut potential.

Place down the planks on saw-horses, and put a bead of waterproof wood glue over the whole border of a single plank. Since this is an outdoor use, water resistant wood glue should be utilized to avoid the seam when subjected to wet from splitting.

After the bead of adhesive is used slide the borders together. This activity creates a strong bond and equally distributes the adhesive.

Pull on the edges of the planks apart and scrutinize the adhesive coverage. The adhesive has to be equally spread over the whole border. Otherwise, add more paste to dry locations or regions where the adhesive is absent. Rub examine and the borders again.

Clamp the planks functioning towards another and together starting at one conclusion. Paste squeezes from the seam in a clamping use that is normal. At locations across the seam where the adhesive doesn’t squeeze out, put in a clamp and use clamping pressure till you find paste squeezing from the seam.

Run a putty knife across the seam on either side to cleaning extra adhesive. Removing the paste that is gentle saves you time when attempting remove it after it h-AS hardened.

Let the glued-up seam to dry over-night.

See related