A deck pump sprayer makes quick work of cleaning a deck and applying sealer products. A fantastic sprayer may be a smart investment, especially in the event that you have a good deal of deck area to cover. Fixing the pump sprayer after each use can prevent clogs and harm, particularly when chemical-based solutions have been utilized. Typically, specific products aren’t essential to clean the sprayer’s tank, but using paint thinner may be necessary in case deck sealer or an oil-based merchandise dried within the tank.
Put on waterproof gloves. Wear protective safety equipment such as goggles and lasting shoes in the event that you will clean a high heeled deck pump sprayer’s tank. Eliminate the deck pump sprayer’s pump assembly, and start the tank. Eliminate deck sealer buildup with paint thinner if needed, wiping the interior of the tank thoroughly with a cloth dampened with paint thinner.
Rinse the inside of the tank thoroughly with water in a garden hose. Empty the water from the tank.
Refill the tank with water. Add 1 to 2 tablespoons of liquid dish soap to the tank water, and clean the tank thoroughly with a sponge or cloth.
Set the pump assembly back on the sprayer. Operate the sprayer using the soapy water to clean the sprayer’s hose and attachment.
Empty the sprayer, and wash it thoroughly with water. Fill the sprayer’s tank with water, and run the sprayer, flushing all soap in the hose and attachment.
Empty the sprayer. Disconnect its hose and attachment. Leave the sprayer’s flow controller in the”On” position to permit for good drainage. Store the sprayer at a clean, dry place.